Implementation of ELK Serial Protocol Checksum in Python
I am having problems getting some python code to properly calculate the checksums for the Elk serial protocol. I have looked at the serial protocol document and the example C source code in the...
View ArticleSirens, Drivers, and my OPII
Thanks to all you cocooners, my OPII project has come along quite nicely. I have a solid security system (with no more false alarms!) and the basis for a good automation system as well. I'm starting to...
View ArticleHomeSeer: HS3 Beta Trial Now Available for Download
http://board.homeseer.com/showthread.php?t=160059
View ArticleLeviton modules
Now that the drywall is up I'm going to have to start terminating all the low voltage wiring. I've got multiple Leviton boxes for all of it, hopefully plenty of room (and enough slack on the ends of...
View ArticleStructured Wiring solution and estimated cost
Hello all, First time post and I have questions about cost and what I'm looking to get for my structured wiring solution. This is a new home build, but we have to use their low voltage vendor. The...
View ArticleCant connect to M1xep, not responding
Hi, I am having a problem accessing my M1, I cant see it on my network, if I do an xep search none found comes back. I tried to reset the board but I still can't search and find it. Think the board...
View ArticleHow can I arm/disarm my Elk M1 remotely?
I think this has an easy answer. I have an Elk M1 with an M1XEP - What is the easiest way to arm and disarm my alarm remotely with this set up?
View ArticleHAI
According to a couple of dealers, Leviton is increasing prices on HAI controllers. Does anyone think HAI will ever have a newer model vs. just firmware updates or does the current architecture work...
View ArticlePowering Up and Down OPII with Multiple Expansion Enclosures
I realize that this is most likely a very simple question, but for the life of me I cannot find any documentation as to how to properly power up and down an OPII with multiple expansion enclosures. My...
View Article3 Gang Switch?
Hi! I'm a long time lurker here, and I have a question. But I don't really know how to ask it, since I'm really bad with general electricity. So well I have at home a couple of UPB Switchs, I've...
View ArticleHAI PC Access
I've got an HAI IIe coming next week that, at least in the beginning, I'll be using with Elve to monitor the open/close status of my doors and windows. Do I need PC Access to do the basic setup or can...
View ArticleRepeat Task (Message)
I was hoping to solict some ideas on a "repeating" task. I have two rules. Rule 1. When garage is open send "Garage Open" email to a@b.com Rule 2. When garage is closed send "Garge Closed" email to...
View ArticleClik here to view.
UPB Install
I'm in the process of installing a few SA UPB switches this weekend. The first two went smoothly; one US2-40 to control the living room cans and a US11-40 for the porch lights. This my first foray into...
View ArticleWhat is the maximum operating temperature of the Elk M1 Gold?
What is the maximum operating temperature of the Elk M1 Gold? I am trying to figure out if I can put it into my attic. Thank you
View ArticleElk KP-NAV F Keys and Text Display
I'm trying to display a counter value on the KPNAV keypad when a F key is pressed. Seems simple enough. This works as expected with a KP1 or KP2 but only displays the F key name label on the KPNAV's...
View ArticleDropping voltage to Ocelot
I would like to connect an Audio detection module from Xantech to my Secu-16 to detect when my record player is on.I am using this Xantech module to detect audio along with their CBCSM1 block that...
View ArticleNational Alarm Monitoring Companies for DIYers
Writing this morning about a few national alarm monitoring companies. I have used one for the last 4-5 years and decided to look some more at the different pricing. Not sure if this is the...
View ArticleBaby monitors with high WAF?
Got a newborn on the way, and wife likes the wireless baby monitors with video that carry with you. Or this one at the least: http://store.apple.com/us/product/H7559VC/A/ibaby-monitor Anybody have a...
View ArticleBuilding New Office / Man Cave, Looking for Ideas/Info
I've experimented with X10 controllers many years ago, so whatever experience I have is surely out of date. So I was hoping you guys could point me in the right direction. I am getting ready to setup a...
View ArticleHowdy from Australia
My name is Jason and I live in Australia. I work for a company called NESS Corporation who manufacture sell and support the NESS/ELK M1 system in Australia. I have been involved with the NESS M1 /...
View Article